New Owners Important Slingshot Infomation

Attention Vendors. Please email robert@rabtech.com any instruction manuals you may have for your products. They will be added to the FILEBASE tab for members to access.
  • The Third Brake Light is located down the top of the rear Fin. It only comes on during braking. I was told by a rider behind me that my Third Brake Light was not coming on. My Slingshot was only about 3 months old and is under warranty, so why worry. Well time is my worry. If I drive 50 miles to the dealer and they find the problem is something has to be ordered, I am in a pickle for a return trip. This video was created to help isolate this problem to help save time and get you back on the road with the Third Brake Light working while the real trouble part is ordered. I have heard other reports of this problem, and it can go unnoticed, who goes back and look at their own tail lights with the brakes applied. Well you should do it, get someone to apply the brakes and check your tail lights fully for all working. Your safety is at stake and you may not have someone to tell you they are out. Some folks go the extra step to install an after market Third Brake Light Modulator to flash during braking. This will help with that process also.

    Now once the you follow this test and find your Third Light does not illuminate, you will know how to isolate the problem and notify the dealer of what part you suspect to be bad. In my case it was the FM Radio Antenna Module that was bad and I was able to drive safely until the part was available. I told the dealer what I did to isolate the problem and they were good with it and ordered the FM Antenna Module ahead of time.


  • New Owners, some of you may have family members that would love to drive your new Slingshot, but do not know how to drive a stick shift. Some will find it is hard for family to teach someone a driving technique. I have created a series of Driving video instructions to help with learning. Each video gives guidance for an important part of learning to drive the stick shift Polaris Slingshot. Good Luck.


    Polaris Slingshot Driving Lessons Playlist

  • Here is a maintenance item on your slingshot that may get overlooked. Drive Shaft Universal Joint. Your Slingshot has a standard Gm Drive Train of Engine, Transmission, and Drive Shaft. The Drive Shaft connects to output of the transmission and the other end connects to the L Drive that delivers power to the rear wheel through a belt drive system. At the drive shaft end that connects to the L Drive there is a Universal Joint. This is to allow the rear wheel to move up and down with the roadway as we drive. All of the power of the engine is applied to the U Joint as we drive though the ranges of speed and different roadways. Any wear on this joint can lead to vibration at certain speeds, performance loss, and failure.

    Now, don't worry. It may take 40,000 plus miles to reach these points due to neglect of maintenance of the U Joint.

    Why not do periodic maintenance of a few squirts of grease every other oil change and have it to last the life of the Slingshot. Some Model Slingshots do not have a Grease Zerk, so this is a sealed U Joint and does not need maintenance.

    I am only the messenger, I do not know why all are not sealed.

    To help the owners perform the maintenance on their U Joints, I have created a video to help guide you. One change I would make to the video is to use a tall cooler cup to pop the cup holders out and not use a screw drive. A rocking motion back and forth will make it pop loose.


  • New Owners at some time or another will look at the rear view Camera when backing up and say" I sure would like to be able to drive with the Camera and see what is directly behind for changing lanes and such". A lot of folks think, just install a switch and connect to the reverse switch on the right side of the Transmission and operate turning the camera on. Well, I am one that thought of that and took the next step to install such a switch. I was so happy to see the camera turn on and display the view when in a drive gear. I wanted to try it out, drove out of the garage to the street and found I could only drive 10 MPH with the engine studdering as you tried to go faster. This is the same condition you experience when you try to back up too fast. This is a normal function that Polaris installed to key you safe as you back up, a speed limiter.

    I was so disappointed. I wanted to find a way to disable the speed limiter and be able to drive with the Rear View cam on, I found out that when I pushed in the clutch, it turned off the studder Limiter function and still have the camera on. I installed a relay that turned on from the switch and the contacts would put a ground on the Clutch Lead, indicating the clutch was depressed. Took a test drive and all worked great. Except for one thing, after about 10 sec of driving at highway speed, the Check Engine Light comes on. That is because the ECM is seeing that there is a problem of a ground on the clutch lead and lets you know with a Check Engine Code. The problems don't end there. I just said, well, I know what the check light is, I will just ignore it and drive with the rear view cam on. Worked great for a while, then after turning the switch on and off a number of times, the ECM saw that there was a problem with me driving in reverse and the clutch depressed, so it cuts the power to the engine and you coast to a stop with the engine in idle. I had to turn the engine off and restart it to get the engine to run correctly. This would be dangerous if you are in heavy traffic as you will be without power.

    I am sharing my findings with you to save you time of trying this mod. Be careful and hope you can find a safe way to make this mod work. I would recommend buying a ready made Backup Camera and hookup to meet your needs.


    Video Test Ride to show results of Engine Shut Down Condition


  • Members and new owners, here is something to be prepared for, Locating and Checking Fuses. I have a video that will guide you in this process. First as always, check your year and model Slingshot Owners Manual for the information. Some years have different fuses, so look at my video as a guide, this video is on my 2015 Slinghsot SL When you are installing accessories, you may ground a power lead. Grounding means, a hot positive lead touches the negative frame or other ground wire. Another term is a Short. You may not know you did it and then something does not work. Remember, when you see something does not work, review any previous work done, and if it involve power connections, then you may want to look at the fuses. Now, as the video will show, you do not have to remove the fuse, you can check it in the location. Relays can be checked by feel, you should feel a click as it operates. May take two folks to check. Always replace fuses with same amp rating. In my video, I show using a Volt Ohm meter to check the fuses. You can use a simple test light probe. To check the fuses you would hook the clip to a good ground, and then use the probe to touch the metal spot on each fuse as I show with the volt meter. The Power ports are the most common problems for lose of power, it is call the accessories Fuse on the Fuse Block.


  • Folks, may reach my post at different locations and miss my first post for this Thread. My first thread post has all the main information for article links and all the Owner Manual Links. Always check my first post to view a link to the post that you need helpful information. It would take a long time to hunt for something when I have a link on the first page. As I add information, I update the first page List of Articles.


    Here is the link to first page and First Post


    New Owners Important Slingshot Infomation

  • New Owners, you should get a Owners Manual with your Slingshot, even the Used Slingshot should come with one. Now, it is geared for all the important information a owner should know about the operation and maintenance of your Slingshot. If you want a more detailed view of the full adjustments, removing body panels, wiring diagrams, diagnostic codes and most things you will need to do work yourself. You will also get explanations of system operations, this will be a great aid in trouble shooting problems. To me it was even worth the full price of $169 I paid. I am finding you can search on line and find better options to get your Shop Manual.

    A lot of folks will soon if not already, need a brake Job. Yes the brake pads will need attention at around 40, 50,000 miles. Now this all depends on your driving pattern, hard breaking, mountain driving and riding the brake will require brake pad sooner. The Shop Manual procedure for Brake Maintenance is shown in detail steps, it is not hard and easy to understand. If you do have a problem understanding a step, you post your question on a thread and you will have 20 knowledgeable members come to your aid.

    You should read all steps before you begin a maintenance procedure outlined in the shop manual. The manual will cover a number of year models, so look for the info for your model. Different years may have different steps. I suggest you read the shop manual like a novel, it has some cool information that you will find out that will help when future needs arrive. If you like your Slingshot, you will enjoy reading it.


  • Brakes and brake Pads need to be talked about for the Slingshot. Most Slingshots do not get a lot of Mileage to worry about replacing the Brake Pads. Brake Pads can last a long time if you observe proper driving techniques. First thing to remember is you have a brake in the transmission. It comes into play when you downshift to a lower gear. The engine compression is actually creating the braking and the gear changes controls how hard you brake. The way this works is if you see you need to stop ahead, first reduce your speed by taking your foot off the accelerator, then at a point the RPM is in the next lower gear range, shift down one gear. Release your clutch slowly at first to let rpm pick up then all the way out. You will hear the engine pick up rpm and feel the Sling start to slow up faster. As you get closer to you final stop, gear down again with in the next lower gear range. You should not shift down more than one gear at a time. Example, going from 5th to 2nd or 3rd could cause the rear wheels to slow down so much that you will start skidding. You can safely down shift one gear and not have this to happen.

    You should drive to only use the brake under conditions that you can not use this downshifting method. This will keep your brakes from needing service of brake pads for a much longer period of time. It is also a much more fun way to drive.

    Now this really comes into importance when driving in the Mountains. I have followed folks down the mountains with the brake lights on the whole way down and burnt brake smell about to kill me. Cars and 4 wheel vehicles with auto trannys is not a discussion here, we are talking manual transmissions. Automatic Trannys can downshift, but most drivers don't know how.

    Now get out there and see how often you can drive without using the brakes. Now, be safe, I don't mean to not use the brake, but don't use it when the downshift will work safely. You will find this will give you a lot more fun of driving by working the gears instead of your foot on the brake. You will also get a better sounds from the engine as the engine provides the braking. Your brake job requirements will be extended down the road also.


    I have a Driving Lesson Video that will demonstrate downshifting. The Link is below, go to 6 min into video and you will see and hear how to downshift. Good Luck!


  • Folks, it finally happened to me! My Slingshot would not start. Turned key on hit the button and nothing. Looked at my Battery Voltage Monitor mounted near Steering Column and saw I only had 8.8 volts. Far below the min start voltage of about 11 volts. Well, I have the Under The Hood Jump Port, so starting will be no problem. Watch the video and see how it is done. I now believe this is a feature that should be standard on future Slingshots. This is due to the Battery Location and hard to get to without a 40mm Torx Bit and driver. There are a couple of different mounting locations that can be used. Research and see what works for you, but get one. My Jump Port is mounted to the Alternator connection. In the video I suggest letting the jumper cable stay on the Jump Port and charge the battery a little bit, 10 min if your start vehicle can wait. You should have a volt meter or a Battery Voltage Monitor to check the level of your battery. When the battery reads 11.7 to 11.9 volts, you should be good to attempt a start. If there is not enough voltage, you will just hear the starter Solenoid Clattering sound. If this happens, Have the starting vehicle, start their engine and let idle. This should place a 13.6 Volt of charging to get the Slingshot battery up to level quicker. It would be good to have a Volt Meter or a Voltage Monitor of some kind handy with the Slingshot. Good Luck on not having a dead battery condition.


  • I know some of the new owners have had their Slingshots for a while and are really enjoying all the aspects of attention, driving, cruising with other Slingshots in group rides. It may have crossed your mind to capture some of your ride adventures in video. Some may find this a challenge. Where can you mount a camera and what type and what mounting system, well it goes to the point, without direction, you just don't do it. I am here to help you with one camera and one system to mount a Aukey Dash Cam. If any of you have mounted a Dash cam in you car, you know they all come with a suction cup mount for the windshield. It does not work well with the Slingshot. The Dash Cams are not expensive, under $75 and capture a great HD video or photos. Now My video will show all the steps to construct a base for the Dash Cam and the GoPro Mounting system will be custom modified to mount your Dash Cam to your Slingshot. You can also use a Magic Arm or Ram Mount to give more mounting locations on your Slingshot. The main thing is to have a Dash Cam that you can use for capturing your Ride Video. A GoPro is a great Cam also, but cost will make it out of reach for most. Also record time is only about 1 hour.

    The Aukey Dash Cam I propose with a 64 Gig Mem Card can capture 5 full hours of ride video in 10 min segments. This is important to be small amount of time for editing. Actually 5 min is a better capture segmented time. The video does not have breaks, but it is many files instead of on big 5 hour file. Now I do have a video on how to edit video after the ride, you may want to find it on my youtube channel if you don't know how to edit video. It is better than raw video.

    Well, let's get to watching and see if this will work for you. You can modify the information to adapt the Camera you have.

    Good Luck and share you ideas here if you like. I am just getting you started in designing things that work for you and your needs.