I've had no issues on led failures on my stacks. All 4 stacks have 2" openings directly over the engine and a lot of heat is released from the engine compartment that travels over the leds
installed mine under the coil cover no problems
I've had no issues on led failures on my stacks. All 4 stacks have 2" openings directly over the engine and a lot of heat is released from the engine compartment that travels over the leds
How did you run the wiring?
Along the underside of the hood coming forward, then down to the radiator core support. Wire tied to the underside of the hood by drilling a few small holes for the cable to pass through on the hood framework. You could even try the self stick pads that have the holes for the cable ties to pass through, but since it would be exposed to a lot of heat, I felt better having them retained in a more secured manner.
Running your wires in split loom gives some additional protection from heat, but wrapping your wires in heat-resistant tape is a better solution. Hiding wiring is always the hardest part. But the time you take to make your runs almost invisible makes it all worth while. Imagine the runs I have throughout my Sling so far!!!
Cant upload video right now!!! 
Lite the Nite LED did mine at the SSITR show and all I can say is...they are friggin artists. Super clean on wiring and the LED's light up with such precision that people have asked me if I had sections painted.
There's a couple companies that have knocked off my idea of the hood stacks
There's a couple companies that have knocked off my idea of the hood stacks
Boooo
@studiopeg
This is my lighting scheme, thus far. I still have a long way to go before I can call it quits. Like I said before, hiding the wire runs is the most challenging part of LED lighting. Trial and error...and a whole lot of zip ties (don't rely on just double-sided tape), and this is where I am so far. Feel free to shoot me a PM with any additional questions you may have.
@studiopeg
This is my lighting scheme, thus far. I still have a long way to go before I can call it quits. Like I said before, hiding the wire runs is the most challenging part of LED lighting. Trial and error...and a whole lot of zip ties (don't rely on just double-sided tape), and this is where I am so far. Feel free to shoot me a PM with any additional questions you may have.
Holy mackerel! It’s the 4th of July and New Years Eve rolled into one!
I finished my cockpit and speaker lights yesterday and youre not kidding... the time and attention keeping the wiring hidden and cleanly installed was hours.
I have wheel lights to be put on and I cannot find anyone or any local business to do it. They just sit in their box. It’s so depressing.
Holy mackerel! It’s the 4th of July and New Years Eve rolled into one!
I finished my cockpit and speaker lights yesterday and youre not kidding... the time and attention keeping the wiring hidden and cleanly installed was hours.
I have wheel lights to be put on and I cannot find anyone or any local business to do it. They just sit in their box. It’s so depressing.
I would do it for you if I could! It's not to bad a job. With everything you have done so far...I have faith in you to do it!
SSREAPER
I would do it for you if I could! It's not to bad a job. With everything you have done so far...I have faith in you to do it!
SSREAPER
No can do. I don't have a lift to get the wheels off and work under the sling.
No can do. I don't have a lift to get the wheels off and work under the sling.
Where do you live @studiopeg?
Massachusetts
Where do you live @studiopeg?
MA/NH border
Funny thing is... I have family that lives up there lol
SSREAPER
Display More
I've had no issues on led failures on my stacks. All 4 stacks have 2" openings directly over the engine and a lot of heat is released from the engine compartment that travels over the leds
I so want these stacks. Looks freaking awesome great work
I so want these stacks. Looks freaking awesome great work
Im sure if you ask @funinthesun and offer enough $$$$$$$ he will sell them to you 
SSREAPER
@funinthesun hope you are coming to Eureka Springs meet, would love to see those up close and personal.
