Wanted to remove for hydrodipping. I found a couple screws on backside, but after taking those out, nose is still fixed in place.
Is this easily removed? Don't want to pull entire hood apart as @Painter shows in his videos.
Found couple older mentions, but wasn't sure if anyone figured out how to do it lately.
Picture of the piece in question attached. Thanks
I hate the Polaris logo on the front there. Someday I’m going to get it removed.
You are going to have to remove the hood and fender panels to get the nose cone out.
Yep.... @varanog78 is absolutely right. There are three friction clips on each side that are released by pushing up through the bottom.... after removing the inserts, hood and fenders of course!
I hate the Polaris logo on the front there. Someday I’m going to get it removed.
my version of getting rid of it!
Sure did the job,
Here's a schematic of the Polaris nose cone
Here's a schematic of the Polaris nose cone
You are going to have to remove the hood and fender panels to get the nose cone out.
I've been looking for that carbon fiber front fascia... no can find. There are other not so well options on slingmods.com right now, but not the one in your picture. Know where I can find it??
I've been looking for that carbon fiber front fascia... no can find. There are other not so well options on slingmods.com right now, but not the one in your picture. Know where I can find it??
I had mine hydrodipped by Endless Hydrographics in New Jersey. It came out to the same cost as the stickers the are selling. I think TricLed had developed a replacement in Carbon
@studiopeg If you choose to take yours out and replace it instead of just covering it you'd better go to church twice the Sunday before, start on Monday, be prepared to work on it until Saturday, and return to church twice the following day and I still don't know that you'll have enough time to get it out or get forgiveness for all the vulgar and nasty things your going to say about the engineers who designed the SS. PIA doesn't even come close. I've had mine out and could not come up with a solution that I was happy with and will not pay the $250 for the replacement. So far the factory one is back on it and I hate it a little worse every time I walk by and look at it. One day, one day!
@studiopeg If you choose to take yours out and replace it instead of just covering it you'd better go to church twice the Sunday before, start on Monday, be prepared to work on it until Saturday, and return to church twice the following day and I still don't know that you'll have enough time to get it out or get forgiveness for all the vulgar and nasty things your going to say about the engineers who designed the SS. PIA doesn't even come close. I've had mine out and could not come up with a solution that I was happy with and will not pay the $250 for the replacement. So far the factory one is back on it and I hate it a little worse every time I walk by and look at it. One day, one day!
@studiopeg If you choose to take yours out and replace it instead of just covering it you'd better go to church twice the Sunday before, start on Monday, be prepared to work on it until Saturday, and return to church twice the following day and I still don't know that you'll have enough time to get it out or get forgiveness for all the vulgar and nasty things your going to say about the engineers who designed the SS. PIA doesn't even come close. I've had mine out and could not come up with a solution that I was happy with and will not pay the $250 for the replacement. So far the factory one is back on it and I hate it a little worse every time I walk by and look at it. One day, one day!
yikes. I canned the idea as soon as I saw you have to take the hood off. I just hate that butt ugly rough black plastic. TricLEDs carbon cover is out of stock, supposedly they are coming up with a new version. Will just have to wait and see.
You can cover it up like i did.
The Polaris name is such an eyesore!
I want to hydro-dip the plastic after I fill-in/sand off the lettering ~> been saying that for almost a year now, maybe I'll get my butt in gear, and do it this summer?! 
The Polaris name is such an eyesore!
I want to hydro-dip the plastic after I fill-in/sand off the lettering ~> been saying that for almost a year now, maybe I'll get my butt in gear, and do it this summer?!
I’ve been thinking about doing that also.
The Polaris name is such an eyesore!
I want to hydro-dip the plastic after I fill-in/sand off the lettering ~> been saying that for almost a year now, maybe I'll get my butt in gear, and do it this summer?!
I’ve been thinking about doing that also.
I recommend it... 
Courtesy of the man @Painter!
Or this before I color sanded.
Or this before I color sanded.
Yeah....we need to talk. I want to learn.
Or this before I color sanded.
Yeah....we need to talk. I want to learn.
Might outta have @sideseatdriver in on that class 
