Personally, not in a hurry. I have all winter, and this is a winter project since I need to remove my fender and transfer that bolt hole pattern. Winter here varies, but starts around now to a month from now, and usually runs into March. I'll get you the $$ as soon as you have PayPal set up. Just wait until you have the push pins and send it all together. I like the larger ones also, for the record.
Rear Protection Anyone?
-
-
-
No hurry for me either. Central Indiana weather has shut me down for awhile. I like the bigger pins also. Will pay as soon as I get the info.
Sent from my iPod touch using Polaris Slingshot Info
-
I’m not in any hurry either you can send all together. I will get you paid soon as pay pal is posted. And my wife is home since I don’t know how to pay pal!
-
@SlingLow I am not in a rush either, i won't be riding my sling until late january if lucky but realistically it won't be until after march.
Also I have decided to attempt learning how to hydrodip.....not going well so far.
I've been curious about the hydrodip. It looks pretty nice but seems that it could be difficult to get good results.
When you get something you're proud of, shoot us I pic! If you want, show us your failures too. -
I’m not in any hurry either you can send all together. I will get you paid soon as pay pal is posted. And my wife is home since I don’t know how to pay pal!
That's funny. I'm planning to post up the info as soon as my wife tells me what it is...
-
Like others have said already, I'm in no hurry, and I definitely like the look of the larger fastener.
-
No hurry here!!!
-
I sure appreciate all of y'alls patience. I am getting caught up on life's pleasures and responsibilities and will start packaging these up tomorrow.
I will send out the wrinkle black 1st so those interested should get a PM tomorrow to confirm everything. If you don't get a PM, or want one and you're not on the list, send one my way. I'll be sending them with the 3/4" diameter push fasteners since that's what I've got on hand. I will also send out 1/2" fasteners later to anyone who wants them.
I should have the gloss black and the red in hand in hand in the next day or two.
-
I have confirmed shipping addresses from the following forum members. Prices are shipped. I will send PMs with the paypal link tomorrow morning:
@roadog1aj - gloss black - $75
@bjk81 - wrinkle black - $65
@CptJeep - wrinkle black - $65
@Neosolidus - pearl red/clear - $75
@Zorasmiles - pearl red/clear - $75@sgtklein - gloss black/clear - $75
@CDCAMEL6 - pearl red/clear - $75
@PaddyMcTexan - wrinkle black - $65
@Goats_Hogs - gloss black/clear - $75
@MWSlingshot - gloss black/clear - $75
@2W2X1 - gloss black/clear - $75
@MiM - aluminum/clear + FunCycle luggage racks - special pricing
@KayTwo - wrinkle black - $65
@sgtklein - gloss black/clear - $75
@flipr - gloss black/clear - $75
@McClendons - gloss black/clear - $75I have interest from the following forum members. Feel free to jump in anytime:
@MBMedic - TBD
@Cypressfunk13 - TBD
@Cywolv - TBD
@johnl327 - gloss black
@SSREAPER - gloss black/clear
@DKF Texas - gloss black/clear
@Dread Pirate - gloss black/clear
@Street Doc - black - not sure which
@Slingrazor - smooth finish - can be made from smooth aluminum - qty 2
@Bill Martin - wrinkle black - ship before @Slingrazor -
Here's what I have on hand. The red and @MiMs aluminum should be in
yesterdaytodaytomorrow. I will post up pics with each of them installed on the back of my Sling.The 3M specs for their tape indicates a requirement of 4 square inches of tape for each pound of weight which includes a safety margin. I have installed 7.5 square inches of tape for the 1.5 pounds each plate weighs which includes another small safety margin in addition to the 2 push fasteners. 3M also recommends an install temp of 70-100 degrees. I hit each spot that tape is installed with my heat gun, after cleaning with isopropyl alcohol, to ensure this. I would suggest that you do the same on your plastic when installing. There will be an instruction set included with each plate and I will post it up here as well for those that might be considering this mod.
-
-
@SlingLow - I'm a solid yes on the wrinkle black.
I guess you looked at the mirror.
-
-
-
I'm still good for gloss black with clear please.
Pls send paypal address and total needed.
Thanks
Sent from my SM-G935V using Polaris Slingshot Forum mobile app
-
I am good for the glass black/clear. Please let me know your PayPal address and I will friend you payment with my address. Thanks
-
Oops. Typo. Can't get nuthin' by you! -
Thanks for putting this all together Doug! Payment sent. You're gonna be RICH!
-
Thanks for putting this all together Doug! Payment sent. You're gonna be RICH!
I'm already rich, Joey. I just don't have a lot of money...