I want to remove painted interior parts two up by windshield and the two long parts past shifter..
So how do they come out ??
Before I start pulling and breaking,,Thank You .
Removing painted interior parts
-
The dash ones pull up held by 4 clips, two in back two in front....I assume the shifter ones pop off too...
-
The 2 panels going between the driver and passenger on the transmission tunnel are held by plastic clips molded into the panels and some tape strips. There are also 2 pushpins holding the top of the trans tunnel covers up under the two dash cover pieces each side of the windshield mount. IIRC, the safest way to remove them is to carefully lift straight up, starting from the rear, until you feel the tape give way. Each panel also has a large plastic clip molded into it up near the radio cubby area and after lifting and freeing the rear portion pf the panel, you then need to pull back on the panel to free the large clip. Use caution just in case I remembered incorrectly.
-
The dash ones pull up held by 4 clips, two in back two in front....I assume the shifter ones pop off too...
With the hood open.
-
Might need to get windshield off... If you have one harleyujoe
... -
If you have the ripper series windshield you can pull the upper panels out with it on.
Sent from my iPhone using Polaris Slingshot Info
-
Yeah. I forgot to mention my MadStad Adjustable shield needs to be either raised out of the way or removed ion order to clear the two top dash covers when they are removed.
