HID's in all 6 lights?

I run 6 55watt LED lights. I do have 2 of them on the fog lights circuit

Quote from VIPNiSS

i know from factory the plugs/connectors are already there. are those canadian lights on the same circuits as headlights or fog lights?

The fog lights are separate. If you had the headlight recall done on a 2015 the six headlights should be on two separate relays. I do not know about the newer models.

We have our HID's in all 6 lights, it is pretty bright at night and we have not had any issues with wiring with that setup.

Hope that helps,
Dave

Quote from VIPNiSS

if this is the case then those canadian lights are most likely on same circuits as US headlights then

Yes, as far as I know. I also know that the relay will not support 4 HID lights on high beam.

I had the center lights and the canadian on the stock relay, within 5 minutes with the HID's on high the relay would over heat and start going on and off. This was the same morning that I went to DDM to meet @rabtech - @Wrenchmn - @MACAWS when I got back to Georgetown I ordered the LED's for all 6 lights.

Quote from VIPNiSS

were they the 55w or 35w hid's?

I do not know, whatever came stock in the centers and the Can. were what Cycle Springs installed in SSITS15

Any HID kit worth a damn should have its own relay harness drawing power directly from the battery(or alt fuze box if said box can handle it) and use the stock wiring as a trigger only, when properly installed HID systems should not make the stock relay heat up.

Sent from my iPhone using Tapatalk