First your going to need the same swear jar you used when/or if you removed the hood inserts.
After retrieving the swear jar you will need to remove the 4 t40 bolts in the wheel well. Then remove the t25 at the back of the wing. It's underneath and kinda hid.
Now. Go grab a drill and put a 3/16 drill but in. Drill the aluminum rivet out of the top.
Then grab a long thin screw driver and break the double sided tape joint at the top of the wing.
Once you have the tape broke loose. Go to the back of the wing and take the palm of your hand and smack the wing towards the front tire. It will slide forward and off.
Replace the aluminum rivit with either a plastic rivit or with another aluminum rivet.