Ok, I guess no one, other than @MISTERZ06 is using the port I'm using. I know he gave me the Autometer part number for the 0-80 psi gauge. I guess I'll try that, hopefully it will be enough. Thanks
Oil Pressure Gauge
-
-
Is there a problem with pulling the temp and pressure off an oil filter remote?
Pulling the temp is fine. Pressure will be a little different as its hard to say what it will read out there. And since its not on the engine its not going to show you a problem if one were to arise.
-
Pulling the temp is fine. Pressure will be a little different as its hard to say what it will read out there. And since its not on the engine its not going to show you a problem if one were to arise.
Jeff thank you for the input. What size adapter for the back of the block do I need to connect a 1/8 NPT switch?
-
@Slingrazor I copied this pic from the 12th post in this thread from @Travis I think this answers your question. From what I've read this adapter will also work on the block oil galley ports others have used under the exhaust manifold/header as well. Hope this helps
-
@Slingrazor I copied this pic from the 12th post in this thread from @Travis I think this answers your question. From what I've read this adapter will also work on the block oil galley ports others have used under the exhaust manifold/header as well. Hope this helps
Thank you
I saw that but was unsure. -
That is the correct adapter.