My hood opened about 90% of the time on the first try. I thought I might improve things by installing the rubber bumpers.
I’m lost. Should the bumper be located at A or B? on the photo. I’ve seen photos of both locations. I think this required a ½ in hole.
Is the bumper by the windshield the short or tall one?
Last question. There is a bumper towards the front that has a bolt and nut on it. Is this adjustable for the hood?
Thanks for the help.slingshotinfo.com/wcf/index.php?attachment/27616/
polaris instructions on bumper kit (The 4 without threaded inserts!) They ones with the threaded inserts are adjustable, but don't get carried away- I adjusted mine 1/2 turn at a time. Watch that you don't get too low, so the screw in the fake black triangular hood vent thing hits manifold cover
This is what I did and it worked very well for me.
1- I left the existing stock aluminum plates with rubber pads in place.
2- I bought a set of the 16.5 revised bumpers and installed the (2) taller ones in the appropriate place below the windshield.
So far all has been good. I am also using (2) hood lifts
