Posts by MISC

    $18.99 Amazon fuse block fixed the issue. Must have gotten a bad block from Slingmods because this thing won't do shit. 12v going in on the $100 block and 2v coming out. Amazon block 12v going in and 12v going out and everything works.

    Guys I'm having an issue with the Fuze Block on my Sling and ordering a new one has not cured the issue. I have a good ground on the block. When the ignition is off I have 12v constant to the block. When I switch the ignition on the 12v constant goes away (is this normal?) and the 12v switched takes over. All my LEDs are set for switched side and not constant. When I check for voltage at the fuses there is none. The old Fuze Block did this and I just figured the relay went bad after 7 years but the brand new one has the same issue. Is there something simple I'm missing? All other factory lights work fine. Thus is just affecting all of my LEDs running off my Fuze Block. Help

    Our cabin was great but there was NO WAY our Slings could make it up the steep gravel driveway. Shout out to the awesome neighbors that saw our struggle (i gave it a couple of good tries) and let us park in their "flatter" driveway. Slings got up that with no issues. Saturday Dragon ride was what you'd expect on a Saturday, tourist after tourist with no Dragon etiquette but we still had a great time and my buddy got to experience 129 for the first time.IMG_20230605_173333_327.jpg

    Have a good friend looking for one with the GM engine that's not clapped out or tricked out to the point that the owner is looking for a mint for the ride. Figured he could find one that has low miles that just didn't get used or upgraded. If you have links it would be appreciated. East coast region.

    Have any of you tried to remove the "SLINGSHOT" hood lettering after a few years? After 6 years mine is starting to look pretty rough and was going to replace it with the raised Tuf Skin decals. Was wondering if those stock decals get really brittle after a few years and I'm going to have to remove those letters in a thousand pieces and scratch up my hood. I know I'll need to heat them up. Any tips would be appreciated. Thanks

    Getting ready to have to change out my Michelin Pilot Sport rear tire. A little disappointed on the longevity of the tire though. Won't even get 9k out of it. The same front tires look great still so I'm sure my right foot has something to do with it too but I was expecting a little more from a Michelin. I guess it will be back to the Nitto on the rear. Got over 15k on last Nitto but the grip was not as good as the Michelin, especially when cold.

    Yep. I would be shocked if it didn't fit the older models because its doubtful Polaris changed the main mounting bolt locations. Its literally 8 bolts front and back and unlike the Slingshade this top requires removal of the roll hoops and the frame of the top serves as the new roll hoops.

    How long ago did you get yours? The site says they’re discontinued.

    Yeah its been at least 2 years. That sucks they are discontinued because they look great in a dark area. You can see how dim they are in this shot. If there was some kind of LED booster that could brighten those up it would be perfect.