Do you have a link to the kit you ordered and then links to the other parts that are needed? I know you mentioned a kit and some description of things. Although if you have all the links. I can just order the parts from it would be awesome. Thank you for putting this together!!!
How to install a line lock on your front brakes
-
-
Best way is to go to a local parts store and raid their brake fittings. And get a steel line kit with multiple fittings.
-
Can you atleast share the link of the kit you said you started with?
I was told by someone else they would do a line lock install for me, in fact they ordered the parts and have them. But now they don't wanna do the job. That's fine and all. But still does not change the fact that I want line lock. Hehehe.
Well if you have it in your heart to share with me. I would much appreciate it.
-
i really dont remember. It seems like the line lock comes with a few adapters. Amd then i found a kit that had 3 short steel lines and some adapters in it. Then i went to my local Orileys and raided the parts bin for one of the adapters. You just have to make sure they all fit perfectly. And if I remember it seems like some of the fittings are so close to each other that it gets tricky. I wouldnt install another one because it was so touchy to get the correct parts.....
-
Ahh okay cool. Thank you
-
Here is basically the loop I made. None of the lines are touching anything or in a bind at all. The solenoid is going to be bolted to the frame so it won't move at all. This will keep the loop rock solid and also keep it from vibrating.
Hi...why did you empty the rear brake reservoir?
-
Hi...why did you empty the rear brake reservoir?
That was a long time ago. I honestly don't think I emptied either one of the brake reservoirs.
-
That was a long time ago. I honestly don't think I emptied either one of the brake reserT
Thanks for the reply...I found that the when you took out the master cyl fitting, it empties the rear brake reservoir...now it clean up time...damn!
-
Thanks for the reply...I found that the when you took out the master cyl fitting, it empties the rear brake reservoir...now it clean up time...damn!
Ok, That makes sense... I didn't empty them. they emptied all on their own.
-
After my install of the line loc...my brake seems to have a sensor message...my brake light is showing up???? What's gives?! No problem with my brakes?!?
-
After my install of the line loc...my brake seems to have a sensor message...my brake light is showing up???? What's gives?! No problem with my brakes?!?
It should not even know it's in line until u use it. Every time you use it it will set the yellow lights off on the dash till you restart. Just another reason I shit canned the dash and ecu.
-
Hi Rabtech, my Hurst solenoid doesn't click! When I hook the 9V battery...should I hear a solenoid click?
rabtech will send him an alert....that somebody is looking for him.