I have 4 sets of LEDS I want hooked up. I want them all hooked up to the auto plug but I want the 2 sets in the middle to go on and off with the illuminated plug. Can anyone show me how to wire this up please.
LED Wiring Question
-
-
Maybe...
Not sure why the switch has a ground...usually the hot wire is just interrupted like the drawing...
You just need an on/switch....that switch looks like a 3 way switch.
-
my next question would be...why the plug...are these temporary lights?
If not just find a hot wire that is hot when you turn on the key and wire them as shown.
Eliminate the plug and run a black wire to ground and attach the red wire to key on, hot wire.
-
The light in the illuminated plug would have to fed from a key on hot wire.
-
@Bigdog The 2 outside sets are gonna go inside the roll bar they will be white led's. The 2 middle ones are already installed on the sharks fin in between the seats facing forward, But,,,,, they are BLUE and it's illegal to run them while driving unless I'm in a controlled cruise like I have been twice now and had them on with no problem. So I want to be able to turn them on and off as needed. So, the nearest power for them is the auto plug in between the seats so like I said I want them all to plug in there but be able to switch the blues on and off. Hope this helps understand my dilemma lol
-
I would do it as described in my first response. With an on/off switch.
-
Get a separate fuse block to run your accessories and use wireless remotes for the the lights.
Sent from my iPhone using Tapatalk
-
Can you use a switch to run accessories with this fuse block and how to wire?
Sent from my iPhone using Polaris Slingshot Info
-
Can you use a switch to run accessories with this fuse block and how to wire?
Sent from my iPhone using Polaris Slingshot Info
You can use an on/off switch for anything....which fuse box?