Went to the dealer a couple days ago. They have new ones that are inserted in some places, and bolted in a couple others. Sounds like warranty I said, and the parts gal agreed. She did up the work order and as soon as they are in, they will mount them.
Got them doing the fix on the stereo as well as I have absolutely no FM unless I am inside the city the broadcast is coming from. Also Warranty....yay
There are three "bumpers" per side. As you know the ones by the headlights were there from the beginning. There are new ones where previously stated. I had to cut mine out by the windshield to install my Madstad windshield. Doing that solved my hood latch hang up. The one but the drivers windshield was causing upward pressure on the crab claw latch and it wasn't releasing easy. Now it does. If you get them and develop that issue you could shave it down with a razor knife. Its fairly soft/ easy to cut.
Any chance someone has a part number - My dealer says there is no listing out to 2017 (which would include 2016.5)
I want to order a set -
@Noel Hughes found them once, I'm sure he can get those to you.
@Noel Hughes found them once, I'm sure he can get those to you.
Thanks he was the first one I thought of but figured he had his hands full at the moment. I will catch up with him at Maggie
I sent you a PM about something else.
We could put a big in @Noel Hughes ear to bring a bunch of hood bumpers to MV as others may want to purchase them as well. 
Quick search on cyclesprings website shows these bumper pads if it helps. Pn: 2206305
Quick search on cycles prints website shows these bumpers pads if it helps. Pn: 2206305
That is the ticket - thank you!
Was at my dealer about 6 weeks ago and mentioned a bumper that had fallen off. Dealer said there was a service bulletin (not a recall) and the new rubber stoppers were being added under warranty. Dealer had them in stock months ago. They were installed in less than 10 minutes.
Dealer is going to replace mine next week when I get the ECU flash done.
There are three "bumpers" per side. As you know the ones by the headlights were there from the beginning. There are new ones where previously stated. I had to cut mine out by the windshield to install my Madstad windshield. Doing that solved my hood latch hang up. The one but the drivers windshield was causing upward pressure on the crab claw latch and it wasn't releasing easy. Now it does. If you get them and develop that issue you could shave it down with a razor knife. Its fairly soft/ easy to cut.
Wolf
I ordered a set of these and according to the drawing there are 2 different height bumpers.
Can you tell me where the taller ones go?
Thanks
@mac
Wolf
I ordered a set of these and according to the drawing there are 2 different height bumpers.
Can you tell me where the taller ones go?
Thanks
I will check when I get home from work. 
@mac
I will check when I get home from work.
Thanks - no rush I won't have them till Thursday
I ordered a set of these and according to the drawing there are 2 different height bumpers.
Can you tell me where the taller ones go?
tall ones are by the dashboard on mine (dealer installed). Old, single, easy to bend bracket that was in the center up there is gone.
tall ones are by the dashboard on mine (dealer installed). Old, single, easy to bend bracket that was in the center up there is gone.
Thank you! that is what I needed
Thank you! that is what I needed
Now that is funny. I just had mine installed at the dealer. And they put the tall ones under the fenders and the short ones by the windshield. I might try swapping them around to see a difference.
Now that is funny. I just had mine installed at the dealer. And they put the tall ones under the fenders and the short ones by the windshield.
hood closed fine on mine with the short ones by the fenders.......
Is your scoop screw clearing the manifold?
On my 2016 1/2 I have (had) the new style bumpers. I am running the Madstad so the center bumpers are gone. While I have no issues with the way the hood functions the center section it is lower then the dash. Is everyone's hood even all the way across? Also I have heard with the new style hood bumpers without the center plate there may be clearance issues when running a cold air intake.
I am running the Madstad so the center bumpers are gone.
I have a MadStad shield- bumpers are in the center of each base insert
