Quick question if anyone has the answer. I have the 2018 SL. I just bought the bracket that goes on the dash and against the windshield. The instructions are not too helpful on removing the plate in the front (radio)to get at the holes.. Looked all over online for a video but nothing. Thanks.
Center bracket for windshield
-
-
Welcome to the forum. What windshield brace did you get? Where did you purchase the brace? There should be online instructions.
To take the front plate off the radio on my 2016 you remove the 4 Allen head screws, one at each corner. -
Quick question if anyone has the answer. I have the 2018 SL. I just bought the bracket that goes on the dash and against the windshield. The instructions are not too helpful on removing the plate in the front (radio)to get at the holes.. Looked all over online for a video but nothing. Thanks.
You have to remove the windshield so that you can then pop off the two colored panels next to the dash where the holes are. After the two panels are removed, the radio bezel should pop off also. You'll need a tiny torx tool (not sure of size but someone mentioned it might be a T11?) to fit the four screws holding the radio in....remove those carefully as the torx heads are easy to strip out. You can then slide the radio out and get one hand up under the dash to hold the bracket plate and nuts to fasten the bracket down. Sounds like a lot, but pretty simple other than the ornery torx head screws.
-
It is possible (with a slender hand/arm) to reach in from under the hood and hold the backing plate in place and attach the brace. takes two people - - I have done this on a 2015...
-
I watched three installs without removing the windshield or any panels. One person did remove the radio face. I have removed my radio several times. Easy job. Just four screws and unplug it to get it out of the way. Don’t know about the Ride Command unit.
-
Welcome to the forum. What windshield brace did you get? Where did you purchase the brace? There should be online instructions.
To take the front plate off the radio on my 2016 you remove the 4 Allen head screws, one at each corner.Thanks for the info. I got the bracket through slingmode. The instructions are terrible. Nothing really online either. The instructions dont say anything about taking off windshield. I also think the 2018 is a different set up than the 2016. I am pretty handy , all I would need is a minute video to show ne the right way to get at this. Thanks again guys!
-
Darrell thanks for the info. I think the 4 screws your talking about are not visible on the 2018. I think I need to pop out the 2 holes where it mounts and then take it from there. I dont want to mess with it too much without knowing. I need to take it back to the dealer anyway , the backup camera stopped working after a week. Grr
-
Darrell thanks for the info. I think the 4 screws your talking about are not visible on the 2018. I think I need to pop out the 2 holes where it mounts and then take it from there. I dont want to mess with it too much without knowing. I need to take it back to the dealer anyway , the backup camera stopped working after a week. Grr
In the picture you show the brace...Do you have a 'backing plate'? Like I said "I can reach under from the front" and reach the backing plate and bolts on my 2016, not the Slingshot that we put one on, don't have to take anything off.
-
EJ . That is the brace and yes I do have the backing plate. Sorry , I didn't see about the going under the hood post. I will definitely look at that tomorrow. Thanks!
-
What I described above was how I did my '18 with Nav. I have small hands and couldn't get at it from under the hood, but maybe you can.
-
Thanks for all the info. I will definitely be looking under the hood tomorrow. Waiting on the gull wing top , so I'm sure I will be on here asking more questions lol
-
It is possible (with a slender hand/arm) to reach in from under the hood and hold the backing plate in place and attach the brace. takes two people - - I have done this on a 2015...
This is the best way..
believe!
-
This is the best way..
believe!Don't have to take anything apart.... I can never get it back together....