I am getting ready to install the QA1 shocks and I wonder if anybody who has the single knob 250# spring in front and 350# spring in the rear knows how many threads are exposed under the adjustment rings to get there factory ride height. I unfortunately did not get in on the Hahn buy so these did not come preadjusted. Any help would be appreciated. I did search and did read all the threads I could find but did not see any mention of this adjustment. I just want to get close so I don't have a lot of adjustment to do once they are installed. I know I will have some. Thanks for the help. 
Thread count on QA1 shocks
-
I took my apart to powdercoat the springs and took a snap shot before I did so here are some pictures for you.
-
On my preset QA1’s, 8 exposed treads at rear and 14 at front.
-
Awesome, that is what I needed, thanks so much.
Does your knob turn easy. My won’t turn by hand like Bill said.
Sent from my iPhone using Polaris Slingshot Forum mobile app
-
Not trying to sound like an ass, but they don't turn real easy as in they would turn by themselves while riding. There is resistance and each click is a noticeable click, You should have no trouble turning them in either direction. It sounds like you may have an issue if that's not the case
-
Phil knows about turning knobs by hand.
Sent from my iPhone using Tapatalk
-
Does your knob turn easy. My won’t turn by hand like Bill said.
If your knob turns, you might want to see the doc. Just sayin'.
