Following.
I added the Canadian set to my SS and reversed the wiring to run the lights in the brightest setting full time. Still not enough light for my new hood which doesn't have street lights, lots of curves and DEER all over the place. I feel bad running high beams on at night full time. 
The link didn't work...
Same as these though?
Eyourlife 1X18W Motorcycle Led Wrecker Light Offroad Tow Truck Headlights Jeep | eBay
They look the same to me
3.5" dia
I was reading my service manual 2017, and it says the 2 outer lights are auxiliary, and the 2 center lights are the actual headlights, with high and low beams.
Wondering how the "Canadian headlight kit" converts the outer bulbs to headlights?
Or is the manual wrong? Attached a copy. I'm confused.
Lighting regulations for Motorcycles are different in Canada
US requires the center lights - don't know the exact regulations but someone explained it to me once
Lighting regulations for Motorcycles are different in Canada
US requires the center lights - don't know the exact regulations but someone explained it to me once
Thanks, @MACAWS, @MiM guvmint regs explains a lot, don't need to make sense. Are the stock Polaris bulbs LED's or halogens? Was told H3 and H9 LED can be installed, but didn't know which ones go where.
Thanks much
EH !
I replaced everything with LED's
There is a video somewhere that Noel shows how to turn the outer lights into headlights by bending the deflector plate down out of the way. If you look into the outer head light you can see a metal plate that partially blocks the bulb. Once you bend this plate out of the way it becomes a head light.
I am not sure if the video still exists but if anyone can find it our own @Tripod can... requesting your talent sir!
Lighting regulations for Motorcycles are different in Canada
US requires the center lights - don't know the exact regulations but someone explained it to me once
YAH I think it was one of those crossed over areas where Polaris wanted to comply with as many regs as possible. In CANADA its been mandatory for a couple decades now that all autos have front outside corners marked with daytime running lights that the driver cannot physically turn of in any way shape or form . It still blows my mind away when I drive in the States and many of your older cars still have no daytime running lights. Heh @MiM if you guys weren't always ten or twenty years behind us, most of the cars on your roads would all be as bright as we are by now . Pun intended , lol
Huh? 
I replaced everything with LED'sThere is a video somewhere that Noel shows how to turn the outer lights into headlights by bending the deflector plate down out of the way. If you look into the outer head light you can see a metal plate that partially blocks the bulb. Once you bend this plate out of the way it becomes a head light.
I am not sure if the video still exists but if anyone can find it our own @Tripod can... requesting your talent sir!
Here it is. Go to 3:45 into video for what you’re wanting...
Thanks @Tripod, MACAWS. Just what I was looking for.
Sent from my SM-G935V using Polaris Slingshot Forum mobile app
Here it is. Go to 3:45 into video for what you’re wanting...
I replaced my stock bulbs with HID kits and they are awesome.
The outer lights take the H3 bulbs and the two in the middle take the H9 bulbs. It was all plug and play. If anyone is interested in the kits I purchased let me know.
Sent from my iPad using Polaris Slingshot Forum mobile app
Slightly off-topic, but still somewhat related to headlights. I installed CS Canadian headlights about 2 yrs ago and I've never really been happy with their output, especially since when mounted to the original outer headlight bracket on my 2015 base Slingshot, they were nowhere near aligned with the outer auxiliary lights making proper aiming darn near impossible.
Does anyone know if the newer non-Hella center lights will fit in the original outer headlight brackets used in the 2015 Slingshot? If they fit in the original Canadian headlight opening, that'd giver me the additional High beam lighting I was seeking.
Thanks @Tripod, MACAWS. Just what I was looking for.
Sent from my SM-G935V using Polaris Slingshot Forum mobile app
anyone Have before and after doing that ?
The bending of that medal plate ?
anyone Have before and after doing that ?
The bending of that medal plate ?
it looks like you are asking about before and after of the light with the metal plate. Before wouldn't really matter in the video because he is changing the lights anyway but at the end of the video it sows the difference between the new and old. The plate is easy to bend just the way he shows but don't drive the tool you use to bend it all the way through the glass. Mine was dramatically brighter and better after bending that plate and installing the LEDs.
HID in mine and they are very bright. Had them in since Dec/14 still going strong. $25 set.
Sent from my iPhone using Tapatalk
