New exhaust option

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Some details would be great, right now all we have are two "vague" pictures which might be enough for some to understand what's going on but some of us weekend warriors need some explaining or videos with sound clips to get it.
      Proud owner of an Ultra Super Duper Faster than Light Red.
    • Looks like the battery is moved to the passenger compartment. Won't work with Slings with the full size battery and routed the tip trough the old battery tray area.
      When life knocks you down, calmly get back up, smile, and very politely say, "You hit like a bitch!"
    • WraithSS wrote:

      Looks like the battery is moved to the passenger compartment. Won't work with Slings with the full size battery and routed the tip trough the old battery tray area.
      That much I assumed but when someone says new exhaust option in my mind that means new design/parts which require some details to be posted also would need a sound clip to help decide if it sounds to one's liking.

      So basically what I was looking for was size of the piping and is it coming under the frame or through the transmission tunnel and of course a sound clip.

      Personally i am in the process of looking for an exhaust, Dual side pipes is my dream but i am realistic and know that most likely it will be a rear exit, besides that the only other requirement is that it must be 2.5 so it is blower friendly for next year and MUST not be under the frame, since i can't afford to give up any ground clearance .
      Proud owner of an Ultra Super Duper Faster than Light Red.
    • New exhaust option

      Here is more info , my apologies for being vague.
      My exhaust is full 2 and half inch and runs inside the transmission tunnel . It's adapted to my precision 6262 turbo via Vband .
      My 2015 was a full size battery but I rerouted cables to behind the passenger luggage compartment and downgraded my battery to a motorcycle 400cca battery and it fits in the small valley perfectly. Battery did cost 130 from oriellys.
      I will put my SS on lift and send some pics .
      Sound clip coming tomorrow as well .


      Sent from my iPhone using Polaris Slingshot Info
    • Neosolidus wrote:

      WraithSS wrote:

      Looks like the battery is moved to the passenger compartment. Won't work with Slings with the full size battery and routed the tip trough the old battery tray area.
      That much I assumed but when someone says new exhaust option in my mind that means new design/parts which require some details to be posted also would need a sound clip to help decide if it sounds to one's liking.
      So basically what I was looking for was size of the piping and is it coming under the frame or through the transmission tunnel and of course a sound clip.

      Personally i am in the process of looking for an exhaust, Dual side pipes is my dream but i am realistic and know that most likely it will be a rear exit, besides that the only other requirement is that it must be 2.5 so it is blower friendly for next year and MUST not be under the frame, since i can't afford to give up any ground clearance .
      You also assumed I was talking to you....LOL.
      When life knocks you down, calmly get back up, smile, and very politely say, "You hit like a bitch!"
    • oneshot wrote:

      Here is more info , my apologies for being vague.
      My exhaust is full 2 and half inch and runs inside the transmission tunnel . It's adapted to my precision 6262 turbo via Vband .
      My 2015 was a full size battery but I rerouted cables to behind the passenger luggage compartment and downgraded my battery to a motorcycle 400cca battery and it fits in the small valley perfectly. Battery did cost 130 from oriellys.
      I will put my SS on lift and send some pics .
      Sound clip coming tomorrow as well .


      Sent from my iPhone using Polaris Slingshot Info
      As always Jamie, you're one smart dude that keeps one step (or more) ahead of the pack. Great job. Do you have plans to offer it to fit a Hahn turbo next?
      If your carpet has to match the drapes,
      shouldn't your trailer match your Slingshot?
    • New exhaust option

      funinthesun wrote:

      oneshot wrote:

      Here is more info , my apologies for being vague.
      My exhaust is full 2 and half inch and runs inside the transmission tunnel . It's adapted to my precision 6262 turbo via Vband .
      My 2015 was a full size battery but I rerouted cables to behind the passenger luggage compartment and downgraded my battery to a motorcycle 400cca battery and it fits in the small valley perfectly. Battery did cost 130 from oriellys.
      I will put my SS on lift and send some pics .
      Sound clip coming tomorrow as well .


      Sent from my iPhone using Polaris Slingshot Info
      As always Jamie, you're one smart dude that keeps one step (or more) ahead of the pack. Great job. Do you have plans to offer it to fit a Hahn turbo next?


      Thanks buddy


      Sent from my iPhone using Polaris Slingshot Forum mobile app
    • Ok, so I see a couple of concerns and just wondering how they are addressed.

      1) The exhaust pipe comes through the plastic without a metal flange, thus placing the plastic against the pipe. Is heat not a concern or is it addressed and we just can't see it from this view?

      2) Again, the plastic is tight around that pipe. Doesn't it vibrate and cause a rattle?

      All that aside, I think it looks sharp, just wondering a few things is all.
      :BLACKSS: 2016 Black Pearl 8)
    • New exhaust option

      MBMedic wrote:

      Ok, so I see a couple of concerns and just wondering how they are addressed.

      1) The exhaust pipe comes through the plastic without a metal flange, thus placing the plastic against the pipe. Is heat not a concern or is it addressed and we just can't see it from this view?

      2) Again, the plastic is tight around that pipe. Doesn't it vibrate and cause a rattle?

      All that aside, I think it looks sharp, just wondering a few things is all.


      Good questions and I also was concerned about this because the last thing I wanted was to burn my slingshot to the ground lol.
      The resonator tip is a double walled tip and you can hold your hand on this tip when the engine is running.
      The clamps used to secure this are very rigid so no vibration is detected .


      Sent from my iPhone using Polaris Slingshot Forum mobile app
    • New exhaust option

      MBMedic wrote:

      Ok, so I see a couple of concerns and just wondering how they are addressed.

      1) The exhaust pipe comes through the plastic without a metal flange, thus placing the plastic against the pipe. Is heat not a concern or is it addressed and we just can't see it from this view?

      2) Again, the plastic is tight around that pipe. Doesn't it vibrate and cause a rattle?

      All that aside, I think it looks sharp, just wondering a few things is all.


      Good questions and I also was concerned about this because the last thing I wanted was to burn my slingshot to the ground lol.
      The resonator tip is a double walled tip and you can hold your hand on this tip when the engine is running.
      The clamps used to secure this are very rigid so no vibration is detected .


      Sent from my iPhone using Polaris Slingshot Forum mobile app
    • oneshot wrote:

      Sure I can make one to fit Haun , I need to find someone who has a Haun to I can make a template and a jig .


      Sent from my iPhone using Polaris Slingshot Info
      Hey I know someone with a Hahn!
      Let me know if I can help!
      MOE MONEY - MOE MODS
      :GRAYSS:
      Powered by DDM Engine - Boosted by Hahn Stage 2 Turbo = 382 WHP
    • New exhaust option

      MACAWS wrote:

      oneshot wrote:

      Sure I can make one to fit Haun , I need to find someone who has a Haun to I can make a template and a jig .


      Sent from my iPhone using Polaris Slingshot Info
      Hey I know someone with a Hahn!
      Let me know if I can help!


      Ok , I can take care of a kit from exhaust of turbo all the way back but I don't have measurements. Some pics of under the hood .


      Sent from my iPhone using Polaris Slingshot Forum mobile app
    • MACAWS wrote:

      oneshot wrote:

      Sure I can make one to fit Haun , I need to find someone who has a Haun to I can make a template and a jig .


      Sent from my iPhone using Polaris Slingshot Info
      Hey I know someone with a Hahn!Let me know if I can help!
      Mitch, I think Rabtech is happy with his exhaust :) :) :)
      If your carpet has to match the drapes,
      shouldn't your trailer match your Slingshot?

    Slingshotinfo.com is not affiliated with Polaris Industries the makers of Polaris Slingshot in any way.