I there a way that the LED H3's are on all the time not only with high beam?
Right know when the SS is turned on the T10's LED's are on us running lights (dim)
Canadian headlight conversion
-
I believe the instructions on Slingmods walks you through that option. I followed the instructions and all 6 work as running lights.
"Optional wiring for all 6 headlights running and center as high beams. Please note, we do notrecommend wiring for all 6 headlights unless you are running LED headlights on all 6 housing. Do notrun 6 OEM halogen or 6 HID headlights on the same headlight bypass circuit! "
-
This may help. Just a matter of flipping a couple wires in the plug. This is the way I'm set up w/6 LED low beams on all the time
polaris-slingshot-canada-conversion-install.pdf -
This may help. Just a matter of flipping a couple wires in the plug. This is the way I'm set up w/6 LED low beams on all the time
polaris-slingshot-canada-conversion-install.pdfI run also all 6 with LED but when disconnecting the yellow cable where does it go? I guess where the green is because the black is ground is that correct?
-
I believe the instructions on Slingmods walks you through that option. I followed the instructions and all 6 work as running lights.
"Optional wiring for all 6 headlights running and center as high beams. Please note, we do notrecommend wiring for all 6 headlights unless you are running LED headlights on all 6 housing. Do notrun 6 OEM halogen or 6 HID headlights on the same headlight bypass circuit! "
Thank I run all 6 with LED I'm just confused with there explanation.
-
I run also a 6 with LED but when disconnecting the yellow cable where does it go? I guess where the green is because the black is ground is that correct?
Yep, swapping places between the green/yellow and the black stays put.
-
Yep, swapping places between the green/yellow and the black stays put.
Will do first thing tomorrow thank you
-
Yes like mentioned, need to swap to wires and good to go...Good luck
