Macaws Build
This is an updated build thread - I will only show final mods - please notes some of these mods are second generation.
-
-
The space between the splitter and the radiator has been diving me crazy, I tried to make a few metal diverters but wasn't happy with anything. Cleaning the shop one day a came across the OEM plastic trim we removed when installing he turbo. A little cutting and some heating and bending and her is the finished product!
-
Cold and rainy so in a sever case of boredom I thought I would see just how well polishing the suspension parts would look.
They clean up great.Couldn't stop there so I decided to do some grill work - figured the 3rd time would be a charm!
-
First some Carbon fiber trim, Damn I love the looks of this stuff
DSCF1915.JPGDSCF1916.JPGDDM center post - New Camera mount and Camera power port with remote control
Also mounted a rear facing camera on my lower rear wing
DSCF1905.JPGDSCF1909.JPGDSCF1908.JPGDSCF1968.JPGDSCF1970.JPGSome love from Saint Painter - custom painted visor and a DDM padded center console
DSCF1929.JPGDSCF1912.JPG -
First up - new mount for my IPod and GPS.
New Assault flat bottom steering wheel.
Some more DDM magic
Inovate Boost Controller and Guage
Inovate Oil pressure / Temp Gauge
Inovate Water temp / Voltage Gauge
New gauge Pod
DDM Surge Tank
DDM Sway Bar
DSCF1727.JPGDSCF1850.JPGDSCF1855.JPGDSCF1852.JPGDSCF1851.JPGDSCF1853.JPG -
Drop it off at the DDM shop for tear down
Baseline Dyno Run and tear down
New engine installed
Post Install Dyno Pull
Thank you Dave & Jeff of DDM Works
-
I had been kicking this idea around but since I wanted to use Stainless Steel so it could be etched my dilemma was cutting the shape. Luckily for me I have some great friends with some cool tools. Plasma cutters are wonderful!
Ok here you go
-
Started with a 2015 Pace Journey Car Hauler
18' V Noses x 8.6 Wide
Finished the interior LED Lighting / Tool Cabinet / Storage Cabinet / Jack / Jack Stands / Wheel Chocks / Helmet Rack
AddedRace Ramps for easy Entry
I also use this trailer for Winter Storage
DSCF1209.JPG
DSCF1210.JPGDSCF1521.JPGDSCF1355.JPG -
Originally designed by Rabtech this kit uses some really tough textured material to protect the front wings from damage.
The Gen II version simply enhanced the original design by adding more pieces and changing the way they were cut.DSCF1517.JPGDSCF1518.JPGDSCF1519.JPGDSCF1520.JPG -
Some new Jackets
Fab factory - Brake Cover / Axel Lock
Carbon Fiber - Hydro Dip Belt Cover
Three's Da Life Side Pod Decals
Metricks - Sling Wing & Fender
DSCF1443.JPGDSCF1471.JPGDSCF1470.JPGDSCF1481.JPGDSCF1482.JPG
DSCF1523.JPG
